back to resultsProduct info:
Need help?Wheel questions:
866-531-5200
M-F: 1PM - 1AM GMT
|Sat: 1PM - 12AM GMT
Product info:
Black Rhino Coyote, 20 X9 8-180.00 6 BKMCMA
The Black Rhino Coyote is a concave 8 spoke design with a brilliant machined face and simulated bead lock ring on the lip. The Coyote is built in popular 17, 18 and 20 inch light truck and SUV sizes in a Gloss Black with machined face and stainless bolts finish. It comes with a bolt-on center cap featuring the Black Rhino icon. If you were building a truck from the ground up, you should start with the Coyote, by Black Rhino.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 20" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 9" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 8-180.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 6 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 54.23 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Gloss Blk W/mach Face & Stainless Bolts |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 8 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 3640 LBS |
| VPN Vendor Product Number | 2090CYT068180B25 |
| GTIN Global Trade Item Number | 195338109430 |
