back to results
EXCLUSIVE
Need help?
Wheel questions:
866-531-5200
M-F: 1PM - 1AM GMT
|Sat: 1PM - 12AM GMT
product info
MB Wheels Vector
The MB Wheels MB Vector is a twisted 5 spoke design. It is built in a dual drill bolt pattern in a wide range of fitments for front wheel drive and CUV vehicles. It has a durable paint finish with a clear coat for added protection. Available in an Anthracite with machined face and Chrome finishes. Snap-in center cap with the MB Wheels logo is included. The MB Vector is a wheel that combines sleek looks and affordability.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 16" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 6.5" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-105.0/5-112.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 43 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 20 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Anthracite Machined Face |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1800 LBS |
| VPN Vendor Product Number | VEC16655105112+43AM |
| GTIN Global Trade Item Number | 13260 |