back to resultsProduct info:
Need help?Wheel questions:
866-531-5200
M-F: 1PM - 1AM GMT
|Sat: 1PM - 12AM GMT
Product info:
Method Race Wheels MR403 The Mesh UTV, 14 X7 4-110.00 5+2 BKMCMS
The Method Race Wheels MR403 Mesh UTV is a mesh wheel design with a simulated beadlock on the lip of the wheel. This wheel features Method machined into the face of the wheel and comes with a bolt-on center cap also featuring the Method Race Wheels logo. This wheel is built in popular 14 inch UTV sizes in a Matte Black finish. UTV Wheels are for race and off-road use only and are not subject to any structural or cosmetic warranty because of the conditions these wheels are built for.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 14" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 7" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 4-110.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 38 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 17 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Machined/black |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 4 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1600 LBS |
| VPN Vendor Product Number | MR40347040352 |
| GTIN Global Trade Item Number | 23270 |