back to resultsProduct info:
Need help?Wheel questions:
866-531-5200
M-F: 1PM - 1AM GMT
|Sat: 1PM - 12AM GMT
Product info:
Redbourne Noble (Right), 22 X10 5-120.00 37 DGMTXX
The Redbourne Noble is a twisted 10 spoke wheel with machined cut-outs in each spoke. This wheel is a true directional design, so there is a left side and right side version. This wheel comes with a snap-in center cap with the Redbourne wheel logo, however it will accept the factory OEM Land Rover center cap. The Noble is built in 20 and 22 inch sizes in 6 distinct finishes. Want a new look for your Land Rover, the Redbourne Noble delivers.
"| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 22" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 10" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-120.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 37 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 44 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Matte Gunmetal |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 2300 LBS |
| VPN Vendor Product Number | 2210RDB375120G72R |
| GTIN Global Trade Item Number | 195338035463 |