back to resultsProduct info:
Need help?Wheel questions:
866-531-5200
M-F: 1PM - 1AM GMT
|Sat: 1PM - 12AM GMT
Product info:
TSW Mallory, 19 X8 5-100.00 35 SLMMMS
The TSW Mallory is an exciting, multi-spoke wheel design with a focus on its concave face which is accentuated by its single drilled bolt pattern. It is offered in two stunning finishes, silver with a mirror cut face or full matte black. It includes a snap-in center cap with the TSW wheel logo. With its amazing concave face and wide variety of fitments, the TSW Mallory demands attention.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 19" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 8" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-100.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 35 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 25 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Silver W/mirror Cut Face |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1800 LBS |
| VPN Vendor Product Number | 1980MAL355100S72 |
| GTIN Global Trade Item Number | 195338137846 |