back to resultsProduct info:
Need help?
Wheel questions:
866-531-5200
M-F: 12PM - 1AM GMT
|Sat: 12PM - 12AM GMT
Product info:
Drag DR-41, 15 X7 4-100.00/114.30 10 RDGLML
The Drag DR-41 is a multi-spoke design highlighted by a deep lip and a low offset. It is offered in Flat Black in a full painted finish and also with a machined lip in Gloss Black, White, Red, and Gold. It includes a snap-in center cap featuring the Drag wheels logo. Built in popular 15 inch sizes, the Drag DR-41 will add an old-school tune style with a modern flare.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 15" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 7" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 4-100.0/4-114.3 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 10 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 13 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Red Machined Lip |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 4 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1364 LBS |
| VPN Vendor Product Number | DR41157041073R |
| GTIN Global Trade Item Number | 50999 |