back to resultsProduct info:
Need help?Wheel questions:
866-531-5200
M-F: 1PM - 1AM GMT
|Sat: 1PM - 12AM GMT
Product info:
Drag DR-75, 19 X8.5 5-114.30 38 BKGLML
From Drag Wheels comes the Drag DR-75, a classically styled mesh wheel with machined details on each spoke and rivets surrounding the lip. Available in a stylish gloss black with machined lip, silver with machined lip or virtual chrome finishes, the sleek Drag DR-75 will enhance the look and performance of your vehicle. The DR-75 features a snap-in center cap with the Drag logo and is available in 19 and 20 inch sizes and common bolt patterns to fit a wide range of vehicles.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 19" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 8.5" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-114.3 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 38 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 73 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 29.6 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Gloss Black Machined Lip |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1800 LBS |
| VPN Vendor Product Number | DR751985063873GB |
| GTIN Global Trade Item Number | 62608 |