back to resultsProduct info:
Need help?
Wheel questions:
866-531-5200
M-F: 12PM - 1AM GMT+0
|Sat: 12PM - 12AM GMT+0
Product info:
Drag DR-75, 19 X8.5 5-112.00 35 CHPVXX
From Drag Wheels comes the Drag DR-75, a classically styled mesh wheel with machined details on each spoke and rivets surrounding the lip. Available in a stylish gloss black with machined lip, silver with machined lip or virtual chrome finishes, the sleek Drag DR-75 will enhance the look and performance of your vehicle. The DR-75 features a snap-in center cap with the Drag logo and is available in 19 and 20 inch sizes and common bolt patterns to fit a wide range of vehicles. This wheel will accept your factory BMW (OEM BMW#36 13 1 095 361) or Mercedes (OEM MBZ#A171 400 00 25 or 220 400 01 25) center cap.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 19" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 8.5" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-112.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 35 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 66.56 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 29.6 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Virtual Chrome |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1800 LBS |
| VPN Vendor Product Number | DR751985213566VC |
| GTIN Global Trade Item Number | 62617 |