Product info:
Bridgestone Potenza S-04 Pole Position
If you want to grip the wheel and grab the lead, the Bridgestone Potenza S-04 Pole Position ultra-high-performance tire is the winning choice.
For unbeatable UHP traction, this summer tire uses a silica-enriched compound that promotes grip on dry and wet road surfaces. In wet conditions, the tire reduces the risk of hydroplaning through circumferential grooves that remove water from the contact area.
And as you’d expect from a quality performance tire, the Potenza S-04 Pole Position offers racing-style handling. It uses large stiff outside shoulder blocks to improve cornering capability, and a continuous interlocking center rib to boost steering response while providing rapid braking and accelerating.
Bridgestone Potenza S-04 Pole Position Features
- Boost your dry road steering, high-speed stability, and cornering with the large outboard shoulder, interlocking tread blocks and central circumferential rib
- Enhance straight-line braking-Forces with help from the high-angle tread blocks in the intermediate ribs
- Resist hydroplaning with lateral grooves that pump water into wide circumferential grooves
- Get a boost in wear quality and reduce noise throughout the life of the tire with the continuous circumferential rib that runs adjacent to the inside shoulder blocks
Bridgestone Potenza S-04 Pole Position Treadwear and Warranty
If you want the most robust protection available for your new Bridgestone Potenza tires, consider investing in our exclusive and industry-leading Certificates.
If you do, you get complete coverage and your new Bridgestone Potenza S-04 Pole Position tires will be protected down to 3/32" of wear. And in the extremely unlikely event these tires sustain damage that can't be repaired, you'll get a brand new replacement Potenza S-04 Pole Position.
(You can add our Certificate coverage in the cart of your order.)
Hop in the driver’s seat and experience the thrill of ultra-high performance with the Potenza S-04 Pole Position from Bridgestone.
UNIFORM TIRE QUALITY GRADE (UTQG)Uniform Tire Quality Grade
| SECTION WIDTH Measures the width of the tire from sidewall to sidewall, which is mounted on a wheel and inflated. | 205 - 305 |
| ASPECT RATIO Determines the sidewall height of the tire, based on the width. | 30 - 50 |
| RIM DIAMETER Measures the rim size from top to bottom (in inches). | 17" - 20" |
| OVERALL DIAMETER Measures the tire height from top to bottom when mounted on a wheel and inflated. | 25.1" - 27.4" |
| RIM WIDTH RANGE The approved range of rim widths this tire can be safely mounted on. | 5.5" - 11.5" |
| WEIGHT The weight of the tire measured in pounds (weight of tire only). | 25.0 LBS - 33.0 LBS |
| TREAD DEPTH Measured in /32 of an inch to determine the height of the tread block from top to bottom. | 10/32" |
| LOAD INDEX Determines the weight a tire can carry at maximum air pressure. See load Index chart. | 91 - 102 |
| LOAD RANGE Determines the ply rating of the tire. Should be replaced with the same or higher rating. | SL - XL |
| MAX PSI The max psi is the highest pressure the tire can hold, but should be inflated to your vehicle specifications not exceeding this amount. | 50 PSI - 51 PSI |
| SPEED RATING Designation from laboratory testing to determine the maximum speed the tire can travel. Maintain the same speed rating or higher for replacement. | Y - Up to 186 mph |
| SIDEWALL DESC. The sidewall designation to describe the lettering on the sidewall. | Black Side Wall |
| VPN Vendor Product Number | 001213 - 139851 |