back to resultsProduct info:
Need help?
Wheel questions:
866-531-5200
M-F: 12PM - 1AM GMT
|Sat: 12PM - 12AM GMT
Product info:
MB Wheels Vector
The MB Wheels MB Vector is a twisted 5 spoke design. It is built in a dual drill bolt pattern in a wide range of fitments for front wheel drive and CUV vehicles. It has a durable paint finish with a clear coat for added protection. Available in an Anthracite with machined face and Chrome finishes. Snap-in center cap with the MB Wheels logo is included. The MB Vector is a wheel that combines sleek looks and affordability.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 14.0" - 15.0" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 5.5" - 6.0" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-100.0/5-114.3 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 38 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10.0 |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1800.0 LBS |