back to resultsProduct info:
Need help?Wheel questions:
866-531-5200
M-F: 1PM - 1AM GMT
|Sat: 1PM - 12AM GMT
Product info:
Method Race Wheels MR405 UTV Beadlock
The Method Race Wheels MR405 UTV Beadlock is a full face, split 6 spoke wheel design with a true beadlock for air down, low tire pressure, off-road excitement. This wheel features Method machined into the face of the wheel and comes with a bolt-on center cap also featuring the Method Race Wheels logo. This wheel is built in popular 14 and 15 inch UTV sizes in a Matte Black or Bronze finish. Beadlock Wheels are for race and off-road use only and are not subject to any structural or cosmetic warranty because of the conditions these wheels are built for.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 14.0" - 15.0" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 7.0" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 4-110.0 - 4-156.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 13 - 38 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10.0 - 132.0 |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 4 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1600.0 LBS |