back to resultsProduct info:
Need help?
Wheel questions:
866-531-5200
M-F: 12PM - 1AM GMT+0
|Sat: 12PM - 12AM GMT+0
Product info:
Method Race Wheels MR406 UTV Beadlock, 15 X8 4-156.00 4+4 BKMTXX
The Method Race Wheels MR406 UTV Beadlock is a full face, split 8 spoke mesh wheel design with a true beadlock for air down, low tire pressure, off-road excitement. This wheel features Method machined into the face of the wheel and comes with a bolt-on center cap also featuring the Method Race Wheels logo. This wheel is built in popular 12 thru 15 inch UTV sizes in a Matte Black or Bronze finish. Beadlock Wheels are for race and off-road use only and are not subject to any structural or cosmetic warranty because of the conditions these wheels are built for.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 15" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 8" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 4-156.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | -2 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 132 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 25.02 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Matte Black |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 4 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1600 LBS |
| VPN Vendor Product Number | MR40658046544B |
| GTIN Global Trade Item Number | 191682008153 |