back to resultsProduct info:
Need help?
Wheel questions:
866-531-5200
M-F: 12PM - 1AM GMT+0
|Sat: 12PM - 12AM GMT+0
Product info:
Method Race Wheels MR407, 14 X6 4-136.00 5+1 BKMTXX
Be ready for anything on the trail with the Method Race Wheels MR407, an ATV off-roading wheel built for rugged performance.
Featuring four-lug and five-lug bolt patterns and no center cap, this wheel delivers a dynamic look. The recessed hub sits deep below the spokes, providing a faux concave wheel where the spokes radiate from the lip of the wide set dish. Each reinforcing spoke features a geometric cut out to get a sneak peak behind the hub action. In place of a center cap is a four portion cut out to display the ATV’s wheel hub.
The MR407 comes in 14-15 inch ATV wheel sizes in either a suave matte black or an electrifying bahia blue.
Explore the unknown with Method’s MR407!
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 14" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 6" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 4-136.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 38 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 100 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 18.26 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Matte Black |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 4 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1600 LBS |
| VPN Vendor Product Number | MR40746047551 |
| GTIN Global Trade Item Number | 191682023224 |