back to resultsProduct info:
Need help?
Wheel questions:
866-531-5200
M-F: 12PM - 1AM GMT+0
|Sat: 12PM - 12AM GMT+0
Product info:
Drag DR-60, 20 X10 5-120.00 35 SLMCXX
The Drag DR-60 is a modern split 5 spoke design. It is a single drill bolt pattern in some of the most popular staggered fitments. It includes a snap-in center cap featuring the Drag wheels logo, however it will also accept your factory OEM BMW center cap in bolt patterns 5-120 (OEM BMW cap # 36 13 1 095 361) and your factory Audi center cap in bolt patterns 5-112 (Audi OEM cap # 4B0601170). The Drag DR-60 is a versatile wheel that will enhance your vehicle with luxury.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 20" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 10" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-120.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 35 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 72.56 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 29 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Silver Machined Face |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1800 LBS |
| VPN Vendor Product Number | DR602010233572SM |
| GTIN Global Trade Item Number | 63077 |