back to resultsProduct info:
Need help?
Wheel questions:
866-531-5200
M-F: 12PM - 1AM GMT+0
|Sat: 12PM - 12AM GMT+0
Product info:
Drag DR-62, 16 X7 5-108.00/115.00 40 DGGLXX
The Drag DR-62 is a split spoke design with a high quality, lightweight design. Each spoke has machined cut outs that add extra dimension to the spoke. The snap-in center cap features the D Drag wheels logo. With a wide variety of size, offset and color combinations it will look at home on almost any passenger car or CUV. Looking for a wheel that will deliver classic European styling, check out our exclusive Drag DR-62.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 16" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 7" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-108.0/5-115.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 40 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 19 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Gun Metal Full Painted |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1725 LBS |
| VPN Vendor Product Number | DR62167304073GM1 |
| GTIN Global Trade Item Number | 77908 |