product info

Enkei NT03+M

The Enkei NT03+M is a 12 spoke design with a perimeter brace ring around the spokes. In the Racing series lineup, the NT03+M features a twin valve design for accurate monitoring while adjusting your tire pressure. It is built in popular 17 and 18 inch sizes in a F1 Silver or Hyper Black finish. The NT03+M comes with a snap-in center cap featuring the Enkei brand logo. This lightweight wheel uses the Enkei MAT spinning process, Rim-Rolled technology.

RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip.	18" / 18"
RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip.	8.5" / 9.5"
BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle.	5-114.3 / 5-114.3
OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender.	38 / 27
HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore.	72.6 / 72.6
WEIGHT The weight of the wheel measured in pounds (weight of wheel only).	25 LBS / 25 LBS
VENDOR FINISH The manufacturer finish of the wheel.	Silver Paint / Silver Paint
NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern.	5 / 5
LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated.	1521 LBS / 1521 LBS
VPN Vendor Product Number	3658856538SP / 3658956527SP
GTIN Global Trade Item Number	62462 / 62463