Deals
product info
ITP Coyote
ITP Coyote®
An off-road tire worthy of howling at the moon for.
ITP Coyote® Features
If the prey you’re after is a new swath of land to conquer in your high horsepower off-road vehicle, look no further than the ITP Coyote tires to take you there. This tire is built for UTVs and side-by-sides and can power through a variety of terrains, including hard pack, gravel, desert and sand, soft/loose terrains and intermediate surfaces.
Made in the USA with 8-ply construction, the ITP Coyote tires will upgrade your side-by-side’s look and performance. Dial in your vehicle’s keen coyote-like off-road senses with a ¾-inch tire lug depth that helps you break and steer quickly when proper timing is of the essence. Hone in your UTV’s adaptability and prowess with tires that feature center lug channels which allow it to effectively wrap around large rocks and uneven terrain, drawing on the efficient hunting skills of the coyote.
The ITP Coyote comes in a variety of tire sizes, so you can get out on the road and off to your next adventure.
Features of the ITP Coyote include:
Staggered width shoulder lugs that optimize tire traction on off-road terrain.
¾-inch lug depth ensures proper traction for braking and steering in off-road terrain.
Center lug channels enhance the tire’s ability to wrap and curve around rocks.
Voids and multiple biting tread edges provide top-notch traction for conquering different terrains.
Optimal tread footprint provides level pressure distribution, lateral stability and protection from rollovers.
Reinforced belts and strong sidewalls protect against punctures.
An 8-ply rated tire with radial construction creates a top-of-the-line tire.
ITP Coyote® Treadwear & Warranty
The ITP Coyote is covered under an ITP Limited Warranty for Tires. The warranty covers defects in the tire or materials when purchased from authorized dealers within up to two years of the purchase date. The warranty only covers the replacement of the tire with taxes and must be done by the original purchaser.
Join the pack with the ITP Coyote.
UNIFORM TIRE QUALITY GRADE (UTQG)Uniform Tire Quality Grade
| SECTION WIDTH Measures the width of the tire from sidewall to sidewall, which is mounted on a wheel and inflated. | 10 - 9 |
| ASPECT RATIO Determines the sidewall height of the tire, based on the width. | 0 |
| RIM DIAMETER Measures the rim size from top to bottom (in inches). | 14" - 15" |
| OVERALL DIAMETER Measures the tire height from top to bottom when mounted on a wheel and inflated. | 27.6" - 35.5" |
| RIM WIDTH RANGE The approved range of rim widths this tire can be safely mounted on. | 7.0" - 9.0" |
| WEIGHT The weight of the tire measured in pounds (weight of tire only). | 31.5 LBS - 54.31 LBS |
| TREAD DEPTH Measured in /32 of an inch to determine the height of the tread block from top to bottom. | 21" - 22" |
| LOAD INDEX Determines the weight a tire can carry at maximum air pressure. See load Index chart. | 64 - 84 |
| LOAD RANGE Determines the ply rating of the tire. Should be replaced with the same or higher rating. | DP |
| MAX PSI The max psi is the highest pressure the tire can hold, but should be inflated to your vehicle specifications not exceeding this amount. | 22 PSI - 36 PSI |
| SPEED RATING Designation from laboratory testing to determine the maximum speed the tire can travel. Maintain the same speed rating or higher for replacement. | M - Up to 81 mph |
| SIDEWALL DESC. The sidewall designation to describe the lettering on the sidewall. | Raised Black Lettering |
| VPN Vendor Product Number | 6P0753 - 6P0913 |
Additional Links: